Kia Rio: 35R Clutch Control Solenoid Valve(35R/C_VFS) Circuit Diagram

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications

Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Anchor Pretensioner (APT) Installation
1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Adjustment
ETC module learning procedure When installing new ETC module or re-installing it, ETC module learning procedure must be performed. 1. Hold the ignition key o ...

Brake Booster Vacuum Pressure Sensor: Circuit Diagram
...