Kia Rio: SS-A Solenoid Valve(ON/OFF) Installation
|
1. |
Installation is the reverse of removal.
|
| •
|
When installing, apply the ATF oil or white vaseline to
the O-ring (A) not to be damaged.
|
| •
|
The gasket of the valve body gasket (A) use new one.
|
| •
|
Adding automatic transaxle fluid.
(Refer to "automatic transaxle system" in this group.)
|
|
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed
at valve body.
...
See also:
Low brake fluid level warning
If the warning light remains on, it may indicate that the brake fluid level in
the reservoir is low.
If the warning light remains on:
1.Drive carefully to the nearest safe location and stop your v ...
Power Mosfet (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
blower motor.
3.
...
Installation
1.
Installation is the reverse of removal.
2.
Use a SST (09581-11000) when installing the brake caliper assembly.
3 ...
SS-A Solenoid Valve(ON/OFF) Removal
SS-B Solenoid Valve(ON/OFF) Description