Kia Rio: Heated Steering wheel Inpection

1.

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C(77°F))

B.	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%

2.

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20°C(-68°F) to 20°C(68°F) within 6 minute

B.	The temperature of wheel surface grip must keep 38°C ± 4°C( 100.4°F ± 39.2°F) after 25 minute

C.	At that time switch on, all measure point (1~8)

Heated Steering wheel System Circuit Diagram

Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Electric Power Steering

...

See also:

Voice recognition
Using Voice Recognition Starting Voice Recognition Shortly press the key on the steering wheel. Say a command If prompt feedback is in [ON], then the system will say “Please say a comma ...

Steering Angle Sensor (MDPS Only) Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

Dimensions Projected
1. These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body ...

Categories

Copyright © www.kirmanual.com 2014-2024