Kia Rio: ESC Control Module Components - ESC(Electronic Stability Control) System - Brake System - Kia Rio UB 2012-2024 Service ManualKia Rio: ESC Control Module Components


1. Front - left tube
2. Rear - right tube
3. Rear - left tube
4. Front - right tube
5. MC2
6. MC1
7. ESC control module (HECU)
8. Damper
9. Bracket

EBD(Electronic Brake-force Distribution) Operation
The Electronic Brake force Distribution (EBD) system as a sub-system of the ABS system is to control the maximum braking effectiveness by the rear wheels. It further utilizes the efficiency ...

ESC Control Module Removal
1. Turn ignition switch OFF. 2. Pull up the lock of the HECU connector (A), and then disconnect the connector. ...

See also:

Components
1. Timing chain 2. Timing chain guide 3. Timing chain arm 4. Timing chain auto tensionr 5. Timing chain cover 6. Drive belt idler 7. Water pump gasket 8. Water pump ...

Muffler: Removal and Installation
1. Disconnect the battery negative terminal. Tightening torque Without battery sensor : 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...

Cruise Control Switch: Removal
1. Disconnect the battery (-) terminal. 2. Remove the air-bag module from the steering wheel. (Refer to Restraint - "Driver Airbag (DA ...

Copyright © www.kirmanual.com 2014-2024