Kia Rio Manuals

Kia Rio: SS-B Solenoid Valve(ON/OFF) Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2025 Service ManualKia Rio: SS-B Solenoid Valve(ON/OFF) Installation

1.
Installation is the reverse of removal.

     
•
When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.


•
The gasket of the valve body gasket (A) use new one.
•
Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
SS-B Solenoid Valve(ON/OFF) Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

Inhibitor Switch Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...

See also:

Rain Sensor Installation
   • In case of the windshield with reflection layer which reflects the infrared rays in se ...

Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Categories


Copyright © www.kirmanual.com 2014-2025