Kia Rio: Tire Removal - Tires/Wheels - Suspension System - Kia Rio UB 2012-2025 Service ManualKia Rio: Tire Removal

1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .



     
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
Avoid tire/tool contact with the valve on dismount.
Dismount should end near the valve.
3.
Rotate the wheel clockwise.



Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ch ...

Tire Installation
1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock posit ...

See also:

Evaporator Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistan ...

Removal
Wiper and Washer Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to the ST group - &qu ...

Sunroof Switch Inspection
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the overhead console cover (A). ...

Copyright © www.kirmanual.com 2014-2025