Kia Rio: Turn Signal Lamp (Door mirror) Installation - Lighting System - Body Electrical System - Kia Rio UB 2012-2025 Service ManualKia Rio: Turn Signal Lamp (Door mirror) Installation

Door Mirror Turn Signal Lamp
1.
Install the door mirror turn signal lamp to the door mirror.
2.
Install the door mirror.
3.
Connect the negative (-) battery terminal.
Turn Signal Lamp (Door mirror) Removal
Door Mirror Turn Signal Lamp 1. Using a screwdriver or remover, remove the mirror (A) from th mirror holder. Becareful not to damage to the clip. ...

Room Lamp Inspection
Room Lamp Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assemlby. ...

See also:

Removal
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...

Specification
[Throttle Position Sensor (TPS)] Throttle angle(°) Output Voltage (V) TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 ...

Copyright © www.kirmanual.com 2014-2025