Kia Rio: Tires/Wheels

Rear Torsion Beam Axle Replacement

[Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Front Wheel Alignment

   When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A). ...

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Side Airbag (SAB) Module Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...