Kia Rio: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Direct control VFS[26/B]
▷ Control type : Normal low type
| Control Pressure kpa (kgf/cm², psi) |
9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
26 Brake Control Solenoid Valve(26/B_VFS) Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 26 brake.
...
See also:
Roll Over Valve (ROV): Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
2.
Remove the roll over valve (A) after releasing ...
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
Categories
- Kia Rio Manuals Home
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright © www.kirmanual.com 2014-2025