Removal
1. |
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
|
2. |
Remove the roll over valve (A) after releasing hooks (B).
|
Installation
1. |
Install in the reverse order of removal.
|
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Oil Pressure Switch: Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter. If there is no continuity, replace the oil pressure switch.
2.
...
Side Airbag (SAB) Module Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...