Kia Rio: Antenna Installation - Audio - Body Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Antenna Installation

1.
Install the roof antenna, then connect the cable and the connector.
2.
Install the rear roof trim.
Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...

Audio Remote Control Schematic Diagrams
Circuit Diagram (1) Circuit Diagram (2) ...

See also:

Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

Evaporator Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the evaporator temperature sensor connector (A). 3. ...

Towing
Towing service If emergency towing is necessary, we recommend having it done by an authorized Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to ...

Copyright © www.kirmanual.com 2014-2024