Kia Rio: Head Lamps Removal
Head Lamp
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the radiator grille upper cover (A), after loosening the
mounting clips.
|
| 3. |
Loosening the head lamp mounting bolts (2EA) and disconnect the
head lamp connector (A). Then, remove the head lamp assembly (B).
|
| 4. |
Remove the dust cap(A) and disconnect the connector. Then remove
the head lamp (high / low) bulb(B).
|
| 5. |
Remove the turn signal lamp bulb.
|
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp bulb (Low)
3. Head lamp bulb (High)
4. Dust cover
5. Turn signal lamp bulb
6. Socket
...
Head Lamps Installation
1.
Install the head lamp assembly after connecting the connector.
2.
Install the radiator grille upper cover.
3.
...
See also:
Ignition Coil: Removal
1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connec ...
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when the ECM groun ...
Hazard warning flasher lighting
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as po ...
Categories
- Kia Rio Manuals Home
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright © www.kirmanual.com 2014-2025