Kia Rio: In car sensor (FATC only) Description
The In-car air temperature sensor is built in the heater & A/C control
unit.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance value which changes in accordance
with perceived inside temperature, is delivered to heater control unit and according
to this signal the control unit regulates in-car temperature to intended value.
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the evaporator temperature sensor connector (A).
3.
...
The photo sensor is located at the center of defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode.
The solar radiation received by its light receiving port ...
See also:
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging pa ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...
Installation
1.
Install the BCM.
2.
Install the crash pad lower panel.
...