Items |
Specified lubricants |
Quantity |
Input shaft spline |
CASMOLY L9508 |
0.2g |
Clutch release cylinder assembly |
Brake fluid DOT 3 or DOT |
As required |
Clutch pedal shaft and bushings |
Chassis grease SAE J310a, NLGI No.1 |
Compression Pressure Inspection
If there is lack of power, excessive oil consumption or poor fuel
economy, measure the compression pressure.
...
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...