Kia Rio: Rail Pressure Sensor (RPS)

Installation

   • Install the component with the specified torques. • ...

Description

Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

See also:

Specifications
Item Specification Master cylinder Type Fixed Cylinder I.D. 20.64 mm (0.813 in) Piston stroke 36±1 mm (1.42±0.039 in) ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Heater & A/C Control Unit (FATC) Components
Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 IGN 2 B 17 HI-SCAN (K-L ...