Kia Rio: Specifications
| Items |
Specifications |
|
| Rated voltage |
DC 12V |
|
| Operating temperature range |
-30°C ~ +80°C (-22 ~ +176°F) |
|
| Rated load |
Dimmer and passing switch |
High : 1A (Lamp load) Low : 1A (Lamp load) Passing : 1A (Lamp load) |
| Lighting switch |
1A (Lamp load) |
|
| Turn signal & lane change switch |
6.6 ± 0.5A (Lamp load) |
|
| Front & rear fog lamp switch |
1A (Relay load) |
|
| Wiper & mist switch |
Mist, Low, High : 4A (Motor load) Intermittent : 0.22 ± 0.05 A (Relay load) Lock : 28 A (Motor load) |
|
| Front & Rear washer switch |
5 A (Motor load) |
|
| Variable intermittent volume switch (Rain Sensor) |
Max. 25 mA |
|
| Rear wiper switch |
0.2A (Relay load) |
|
Component(1)
※ Installation order : A → B → C → D → E
1. Steering column shaft
2. Lighting switch
3. Wiper and washer switch
4. Screw
5. Steering angle ...
See also:
Operation Condition for the ISG function
1. Auto stop or Auto start condition
(If all of the below condition are satisfied)
Items
State
Remark
Driving conditions
ISG OFF Switch
...
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting.
...
Alternator: Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Copyright © www.kirmanual.com 2014-2024