Kia Rio: Tightening Torques
| Item |
kgf.m |
N.m |
lb-ft |
| Positive crankcase ventilation valve installation |
0.8 ~ 1.2 |
7.8 ~ 11.8 |
5.8 ~ 8.7 |
| Canister installation bolt/nut |
2.0 ~ 3.0 |
19.6 ~ 29.4 |
14.5 ~ 21.7 |
| Fuel tank air filter installation bolt |
0.4 ~ 0.6 |
3.9 ~ 5.9 |
2.9 ~ 4.3 |
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
Fuel Ta ...
Troubleshooting
Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Pu ...
See also:
Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of
power, or hear loud pinging or knocking, the engine is probably too hot. If this
happens, you should:
1.Pull off the ...
Copyright © www.kirmanual.com 2014-2024