Kia Rio: Head Lamp Leveling Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
| 3. |
Remove the crash pad side switch assembly.
|
| 4. |
Disconnect the head lamp leveling switch connector from lower
crash pad switch.
|
| 5. |
Remove the head lamp leveling switch.
|
| 6. |
The installation is the reverse of removal.
|
Head lamp leveling Actuator Installation
1.
Install the head lamp leveling actuator by turning the adjusting
gear.
2.
Install the head lamp assembly.
3.
...
See also:
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
SS-B Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Copyright © www.kirmanual.com 2014-2024