Kia Rio: Components
| 1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing |
5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Adapter plate |
9. Drive plate 10. Fly wheel 11. Crankshaft sproket 12. Crankshaft pulley 13. Water jacket insert 14. Oil gallery plug or sealing cap |
| 1. Piston ring 2. Piston 3. Piston pin 4. Connecting rod |
5. Connecting rod upper bearing 6. Connecting rod lower bearing 7. Connecting rod bearing cap |
Cylinder Block
...
Disassembly
Engine removal is required for this procedure. (Refer to Engine and transaxle
assembly removal in this group)
1.
M/T : Remove the fly wheel.
2.
...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Front Washer Motor Installation
1.
Install the washer reservoir.
Before installing the pump motor, check ...
Copyright © www.kirmanual.com 2014-2024