Kia Rio: Radiator: Description - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Radiator: Description

[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
[Cooling fan operation conditions]
A/C switch
A/C pressure
[kgf/cm² G (psi G)
Vehicle speed
[km/h (mph)]
Coolant temperature
[°C (°F)]
Cooling fan speed
OFF

V < 45 (28)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
ON
P < 6 (85.3)
All
105 (221) or above
HIGH
6 (85.3) ≤ P < 12 (170.7)
V < 45 (28)
45 ~ 100 (113 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
12 (170.7) ≤ P < 15.5 (120.5)
V < 45 (28)
-30 ~ 95 (-22 ~ 203)
LOW
95 (203) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
15.5 (120.5) ≤ P
All
-30 (-22) or above
HIGH

[Non-Air conditioning type]
The cooling fan operates in single stage. The engine control module (ECM) controls the cooling fan according to the coolant temperature, and vehicle speed.
[Cooling fan operation conditions]
Vehicle speed
[km/h (mph)]
Coolant temperature
[°C (°F)]
Cooling fan operation
V < 45 (28)
95 ~ 100 (203 ~ 212) or above
On
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212) or above
On
80 (49.7) ≤ V
105 (221) or above
On

Radiator: Components
1.  Cooling fan & reservoir tank assembly 2.  Radiator lower hose 3.  Air guard 4.  Upper cover 5.  Radiator upper hose 6.  Filler neck ...

Radiator: Specifications
Item Specification Non - Air conditioning type Air conditioning type Fan type PULLER Fan speed control Resistor (On-Off) ...

See also:

Front Door Components
1 . Front door trim 2 . Front door trim seal 3 . Front door panel 4. Front door belt inside weatherstrip 5 . Front door belt outside weatherstrip 6. Front door window glass ...

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch ...

Installation
   • Install the component with the specified torques. • ...

Copyright © www.kirmanual.com 2014-2024