Kia Rio: System Block Diagram
Component Parts And Function Outline
| Component part |
Function |
| Vehicle speed sensor |
Converts vehicle speed to pulse. |
| ECM |
Receives signals from sensor and control switches. |
| Cruise control indicator |
Illuminate when CRUISE main switch is ON (Built into cluster) |
| Cruise control switches |
Cruise main switch |
Switch for automatic speed control power supply. |
| Resume/Accel switch |
Controls automatic speed control functions by Resume/Accel switch
(Set/Coast switch) |
| Set/Coast switch |
|
| Cancel switches |
Cancel switch |
Sends cancel signals to ECM. |
| Brake pedal switch |
|
| Transaxle range switch (A/T) |
|
| ETS(Electronic Throttle System) motor |
Regulates the throttle valve to the set opening by ECM. |
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch
located on right of steering wheel column. The system has the capability to
cruise, coast, accelerate and res ...
See also:
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Rear Coil Spring Components
1. Spring upper pad
2. Spring
3. Spring lower pad
...
Radiator: Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A ...
Copyright © www.kirmanual.com 2014-2024