Symptom |
Suspect area |
Engine will not start or hard to start |
Vapor hose damaged or disconnected |
Engine struggles to start |
Malfunction of the Purge Control Solenoid Valve |
Rough idle or engine stalls |
Vapor hose damaged or disconnected |
Malfunction of the PCV valve |
|
Rough idle |
Malfunction of the Evaporative Emission Control System |
Excessive oil consumption |
Positive crankcase ventilation line clogged |
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to ...