Kia Rio: Specification
HO2S [Bank 1/Sensor 1]
| Item |
Specification |
| Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
0.6 ~ 1.0 |
| LEAN |
0 ~ 0.4 |
| Item |
Specification |
| Heater Resistance (Ω) |
Approx. 9.0 [21°C(69.8°F)] |
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...
Signal Waveform
...
See also:
Replacement
Front Brake Pads
1.
Remove the brake hose mounting bracket bolt (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...
Cluster Ionizer (FATC only) Description
The cluster ionizer helps to clean up odors in the vehicle or from the
air-conditioner system.
When the ignition switch ON, the inoizer runs a "CLEAN" mode and then
a "ION& ...
Installation
•
Install the component with the specified torques.
•
...
Categories
- Kia Rio Manuals Home
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright © www.kirmanual.com 2014-2025