Kia Rio: ISG OFF Switch: Inspection
| 1. |
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
|
| 2. |
Remove the ISG switch (A) from the switch assembly.
|
| 3. |
Check the continuity between the switch 2 and 3 terminals as the
ISG OFF switch is engaged.
|
ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function.
...
Alternator: Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
See also:
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Circuit Diagram
(M/T)
(A/T)
...
ECM Terminal And Input/Output signal [A/T]
ECM Terminal Function (A/T)
Connector [EGGA-AG]
Pin No.
Description
Connected to
1
Injector (Cylinder #1) [High] control output
...
Copyright © www.kirmanual.com 2014-2024