Kia Rio Manuals

Kia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2024 Service ManualKia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

1.
Installation is the reverse of removal.

     
•
The gasket of the valve body gasket (A) use new one.
•
Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)


•
Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup.
(Refer to "Automatic transaxle control system (Repair procedures)" in this group)
Torque Converter Control Solenoid Valve (T/CON_VFS) Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

26 Brake Control Solenoid Valve(26/B_VFS) Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

See also:

Steering Angle Sensor (MDPS Only) Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

Rear Seat Replacement
Rear Seat Assembly Replacement 1. After loosening the mounting bolt, then remove the rear seat cushion (A). Tightening torque : ...

Back-up Lamp Switch Description
Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. ...

Categories


Copyright © www.kirmanual.com 2014-2024