Kia Rio: Removal
| 1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
| 2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 3. |
(Refer to “Air bag module / DAB” in RT group)
Remove the airbag module.
|
| 4. |
Disconnect the lock nut (A) & connector (B) and then remove the
steering wheel by using special service tools. (09561-11001)
|
| 5. |
Installation is the reverse of the removal.
|
Component
1. Remote control assembly
2. Airbag module
3. Wiring
4. Heated steering control unit
5. Steering wheel body
6. Lower cover
...
Disaseembly
1.
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
2.
Disconnect the heated steering wheel unit ...
See also:
Front Impact Sensor (FIS) Components
...
Rear Wiper Motor Installation
1.
Install the rubber packing.
2.
Install the rear wiper motor assembly.
Tightening torque :
6.86 ~ 9.81N ...
Description
Idle Stop & Go (ISG) function automatically switches off the engine when
the car is at a standstill if the and starts it again as soon as the brake pedal
is released. This not only reduce ...
Copyright © www.kirmanual.com 2014-2024