Kia Rio: Specification
| Item |
Resistance (Ω) |
| Driver Airbag (DAB) |
1.7 ~ 2.3 |
| Passenger Airbag (PAB) |
1.7 ~ 2.3 |
| Side Airbag (SAB) |
2.0 ~ 2.4 |
| Curtain Airbag (CAB) |
1.7 ~ 2.3 |
| Seat Belt Pretensioner (BPT) |
1.8 ~ 2.5 |
| Anchor Pretensioner (APT) |
1.8 ~ 2.5 |
Tightening Torques
| Item |
N.m |
kgf.m |
lb-ft |
| Driver Airbag (DAB) |
7.8 ~ 10.8 |
0.8 ~ 1.1 |
5.8 ~ 8.0 |
| Passenger Airbag (PAB) |
7.8 ~ 11.8 |
0.8 ~ 1.2 |
5.8 ~ 8.7 |
| Curtain Airbag (CAB) |
7.8 ~ 11.8 |
0.8 ~ 1.2 |
5.8 ~ 8.7 |
| Seat Belt Anchor Bolt |
39.2 ~ 53.9 |
4.0 ~5.5 |
28.9 ~ 39.8 |
| SRSCM |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.8 ~ 7.2 |
| Front Impact Sensor (FIS) Mounting Nut |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.8 ~ 7.2 |
| Pressure Side Impact Sensor (PSIS) Mounting Screw |
2.5 ~ 3.5 |
0.25 ~ 0.36 |
1.8 ~ 2.6 |
| Side Impact Sensor (SIS) Mounting Bolt |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.8 ~ 7.2 |
General Information
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...
See also:
Blower Unit Replacement
1.
Remove the heater & blower unit.
(Refer to HA group - "Heater Unit")
2.
Separate the blower unit from the heater unit a ...
26 Brake Control Solenoid Valve(26/B_VFS) Circuit Diagram
...
Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Copyright © www.kirmanual.com 2014-2024