Kia Rio: SRS Control Module (SRSCM) Components

SRS Control Module (SRSCM) Description

The primary purpose of the Supplemental Restraints System Control Module (SRSCM) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

SRS Control Module (SRSCM) Removal

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

See also:

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.85 ~ 1.3) 0.0335 ~ 0.0512 Output volt ...

Front Wiper Motor Inspection
Speed Operation Check 1. Remove the connector (A) from the wiper motor. 1. - 2. IGN+ 3. Parking 4. High 5. GND 6. Low ...

Start/Stop Button Component
...