Kia Rio: Tightening Torque
| Items |
N.m |
kgf.m |
lb-ft |
|
| Front and rear doors |
Door hinge to body |
34.3 ~ 41.2 |
3.5 ~ 4.2 |
25.3 ~ 30.4 |
| Door hinge to door |
21.6 ~ 26.5 |
2.2 ~ 2.7 |
15.9 ~ 19.5 |
|
| Door checker to door |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
| Door checker to body |
21.6 ~ 32.3 |
2.2 ~ 3.3 |
15.9 ~ 23.9 |
|
| Door glass mounting bolt |
7.8 ~ 11.8 |
0.8 ~ 1.2 |
5.8 ~ 8.7 |
|
| Door outside handle cover mounting bolts |
7.8 ~ 10.8 |
0.8 ~ 1.1 |
5.8 ~ 8.0 |
|
| Door channel mounting nuts |
3.9 ~ 5.9 |
0.4 ~ 0.6 |
2.9 ~ 4.3 |
|
| Latch mounting bolts |
7.8 ~ 10.8 |
0.8 ~ 1.1 |
5.8 ~ 8.0 |
|
| Door power window regulator mounting nuts |
3.9 ~ 5.9 |
0.4 ~ 0.6 |
2.9 ~ 4.3 |
|
| Door striker mounting bolts |
8.8 ~ 13.7 |
0.9 ~ 1.4 |
6.5 ~ 10.1 |
|
| Trunk lid |
Trunk lid hinge to body |
6.9 ~ 8.8 |
0.7 ~ 0.9 |
5.1 ~ 6.5 |
| Trunk lid hinge to trunk lid |
6.9 ~ 8.8 |
0.7 ~ 0.9 |
5.1 ~ 6.5 |
|
| Trunk lid latch mounting bolts |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
| Trunk lid striker mounting bolts |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
| Tail gate |
Tail gate hinge to tail gate |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
| Tail gate hinge to body |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
| Tail gate latch mounting bolts |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
| Tail gate striker mounting bolts |
21.6 ~ 26.5 |
2.2 ~ 2.7 |
15.9 ~ 19.5 |
|
| Hood |
Hood hinge to body |
21.6 ~ 26.5 |
2.2 ~ 2.7 |
15.9 ~ 19.5 |
| Hood hinge to hood |
21.6 ~ 26.5 |
2.2 ~ 2.7 |
15.9 ~ 19.5 |
|
| Hood latch to body mounting bolts |
7.8 ~ 11.8 |
0.8 ~ 1.2 |
5.8 ~ 8.7 |
|
| Seat |
Front seat mounting bolts |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
| Front seat frame mounting bolts |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2~ 47.0 |
|
| Rear seat cushion mounting bolts |
19.6 ~ 29.4 |
2.0 ~ 3.0 |
14.5 ~ 21.7 |
|
| Rear seat back hinge mounting bolts |
19.6 ~ 29.4 |
2.0 ~ 3.0 |
14.5 ~ 21.7 |
|
| Rear seat latch mounting bolts |
19.6 ~ 29.4 |
2.0 ~ 3.0 |
14.5 ~ 21.7 |
|
| Seat belt |
Height adjuster mounting bolts |
39.2 ~ 53.9 |
4.0 ~ 5.5 |
28.9 ~ 39.8 |
| Front seat belt upper anchor mounting bolt |
39.2 ~ 53.9 |
4.0 ~ 5.5 |
28.9 ~ 39.8 |
|
| Rear seat belt retractor mounting bolt |
39.2 ~ 53.9 |
4.0 ~ 5.5 |
28.9 ~ 39.8 |
|
| Center rear seat belt retractor mounting nut |
39.2 ~ 53.9 |
4.0 ~ 5.5 |
28.9 ~ 39.8 |
|
| Seat belt buckle mounting bolt |
39.2 ~ 53.9 |
4.0 ~ 5.5 |
28.9 ~ 39.8 |
|
| Outside rearview mirror |
Outside rearview mirror mounting bolts |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
| Quarter fixed glass & moulding |
Quarter fixed glass & moulding mounting nuts |
3.9 ~ 4.4 |
0.4 ~ 0.45 |
2.9 ~ 3.3 |
| Delta glass |
Delta glass mounting nuts |
3.9 ~ 4.4 |
0.4 ~ 0.45 |
2.9 ~ 3.3 |
| Wiper arm |
Wiper arm mounting nuts |
22.6 ~ 26.5 |
2.3 ~ 2.7 |
16.6 ~ 19.5 |
| Sunroof |
Sunroof mounting nuts |
3.9 ~ 5.9 |
0.4 ~ 0.6 |
2.9 ~ 4.3 |
| Sunroof mounting bolts |
6.9 ~ 10.8 |
0.7 ~ 1.1 |
5.1 ~ 8.0 |
|
Specifications
Items
Specification
Hood
Type
Rear hinged, front opening type
Front Door
Construction
Front hinged, full door construction
...
Special Tools
Tool (Number and name)
Illustration
Use
09800-21000
Ornament remover
Trim removal
09853-31000
Headliner clip remover
...
See also:
35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA ...
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...
Windshield Wiper-Washer Switch Inspection
Wiper And Washer Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
...
Copyright © www.kirmanual.com 2014-2024