Kia Rio: Seat Heater Switch Removal

Seat Heater Switch Schematic Diagram

...

Seat Heater Switch Installation

1. Install the seat heater switch. 2. Install the console assembly. 3. Connect the battery (-) terminal. ...

See also:

Installation
1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...

Low brake fluid level warning
If the warning light remains on, it may indicate that the brake fluid level in the reservoir is low. If the warning light remains on: 1.Drive carefully to the nearest safe location and stop your v ...

Electrical System
1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting con ...