Kia Rio: Back-up Lamp Switch Description

Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp.

Shift Lever Adjustment

1. In neutral position, disjoin select cable (A) from shift lever assembly pin (B). 2. Disconnect select adjuster (A) to an arrow. ...

Back-up Lamp Switch Specifications

1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V 4. ...

See also:

Blower Resistor (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening th ...

Front Stabilizer Bar Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Console Replacement
Floor Console Replacement [M/T]    • A plastic trim tool is recommended, but if ...