Kia Rio: Cooling System

Reassembly

   • Thoroughly clean all parts to assembled. • ...

Coolant: Refilling And Bleeding

   Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

See also:

Front Stabilizer Link Replacement
1. Remove the rear wheel & tire Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Seat Belt Switch Inspection
1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

Ignition Switch Assembly Inspection
1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...